Share this:

MINERALS AND ROCKS

Minerals

-Inorganic substances occurring naturally at or below the earth’s surface.

Characteristics of Minerals

  1. Different degrees of hardness e.g. some are very hard e.g. diamond while others are very soft e.g. talc.
  2. Some have atoms arranged in an orderly manner to form crystals e.g. quartz form a 6- sided prism.
  3. Varying number of elements e.g. gold has one (Av) while quartz has 2 (SiO2).
  4. Different abilities to allow light to pass through e.g. some are transparent, opaque or translucent.
  5. Specific colours e.g. gold is shiny yellow while copper is brown.
  6. Have specific surface appearance (lustre) when they reflect light i.e. metallic (shiny) or non-metallic (glass like).
  7. Definite chemical composition or constant ratio of elements e.g. quartz has one atom of silicon and two atoms of oxygen.
  8. Tendency to break along certain lines or cleavage) e.g. flint has cleavage like that of glass.
  9. Different densities e.g. some are very heavy e.g. lead while others are light e.g. silicate minerals.
  10. Some minerals conduct electricity while others don’t e.g. copper conducts while diamond doesn’t.
  11. Some can be pressed into different shapes while others can’t e.g. copper is malleable while flint isn’t.

    Types of Minerals

    Metallic minerals

    Ferrous Minerals-limonite, magnetite, siderite and haematite.

    Non-ferrous Minerals-copper, aluminium, gold, lead, etc.

    Non-metallic Minerals-graphite, diamond, asbestos, coal, etc.

    Energy minerals-petroleum, coal and uranium.

Rocks

A consolidated material composed of grains of one or more minerals.

Classification of Rocks

  • Igneous Rocks

-Rocks formed when molten material from the earth’s interior cools and solidifies on or beneath the earth’s surface.

Types of Igneous Rocks

  • Intrusive Igneous Rocks

-Rocks formed when magma cools and solidifies below the earth’s surface e.g. granite, diorite, gabbro, peridotite.

ecolebooks.com

-Have coarse texture as a result of slow cooling giving minerals more time to form large crystals.

-Are classified further into two:

(i) Hypabyssal rocks- intrusive igneous rocks which are near the earth’s surface.

(ii) Plutonic rocks-intrusive igneous rocks which are deep below the surface.

  • Extrusive Igneous Rocks

Rocks formed when lava solidifies on the earth’s surface.

-Have fine texture due to fast cooling giving minerals less time to collect together to form larger crystals.

They are of two types namely:

  • Volcanic Ejecta

-Extrusive igneous rocks formed in the following ways:

  • When ash and lava ejected from underground as they fall on the earth’s surface e.g. pumice.
  • When dust and ash ejected settle on the ground and get compressed to form a rock e.g. tuff.
    • Lava Flows

-Extrusive igneous rocks formed when basic lava flows over a considerable distance then cools and solidifies e.g. basalt and obsidian.

  • Sedimentary Rocks

-Rocks formed when particles of other rocks are laid down and compressed into layers or when plant and animal remains are buried and compressed and compacted.

  • When they are laid down a layer is formed.
  • As deposition continues additional layers are formed which compress the lower layers into a hard mass.

Types of Sedimentary Rocks

  • Mechanically Formed Sedimentary Rocks

-Sedimentary rocks formed when weathered igneous or metamorphic rocks are deposited and compacted e.g. sandstone and shale.

  • Organically formed Sedimentary Rocks

-Sedimentary rocks formed when animal and plant or animal remains are buried, compressed and compacted.

Classification of Organically Formed Sedimentary Rocks

(i) Calcareous rocks-rich in calcium carbonate e.g. chalk and limestone.

Coral rocks are formed from remains of sea polyps which extract lime from the sea, build shells for protection, attach themselves to each other and rocks to live in colonies, then die and shells to form coral rocks.

(ii) Ferruginous Rocks-rich in iron e.g. ironstone.

(iii) Siliceous Rocks-rich in silica e.g. diatomite.

(iv) Carbonaceous Rocks-rich in carbon e.g. coal.

  • Chemically formed Sedimentary Rocks

-Sedimentary rocks formed when materials dissolved in water chemically react forming new substances then water evaporated leaving layers of those salts.

Classification of Chemically Formed Sedimentary Rocks

(i) Carbonates e.g. trona and dolomite

(ii) Sulphates-sulphate compounds

(iii) Chlorides e.g. halite

(iv)
Silicates e.g. flint

(v) Iron stones e.g. haematite and limonite.

  • Metamorphic Rocks

-Rocks which have changed their physical appearance and chemical properties as a result of subjection to great heat and pressure e.g.

  • Gneiss from granite
  • Slate from clay
  • Marble from limestone
  • Quartzite from sandstones

Distribution of Major Rocks in Kenya

Eastern Kenya region

  • The major rocks are metamorphic rocks e.g. marble in parts of Machakos and schist and gneiss in parts of Kitui.
  • Volcanic rocks in Yatta plateau and Kapiti plans.
  • Sedimentary rocks e.g. limestone rocks used in Bamburi for cement manufacturing.

Coastal Region

  • Major rocks are sedimentary rocks e.g. limestone used in Bamburi for cement manufacture.
  • There are volcanic rocks in Tsavo rich in ground water resources.

Northern and N.E Region

  • Dominated by sedimentary sands.
  • There are volcanic rocks in Mt. Marsabit and around Rift Valley.

Rift Valley and Kenya Highlands

  • Dominated by volcanic rocks
  • There are metamorphic rocks which have resulted from changing of igneous rocks.

L. Victoria Basin

  • Granite and gneiss dominate Western Kenya where they form high rocky hills called granitic tors common in Kisii, Maragoli and Bunyore areas.
  • Sedimentary rocks deposited by rivers e.g. Nyando, Nzoia, Yala and Sondu.

Significance of Rocks

  1. Rocks weather to form soil which is important in agriculture.
  2. Form aquifers which store ground water which forms springs which form rivers and wells which provide water for domestic and industrial use.
  3. Some rocks are sources of building materials e.g. igneous rocks are used to make ballast and limestone rocks are used as building blocks and raw material in cement manufacturing.
  4. Phosphate and nitrate rocks are used to make fertiliser used in agriculture.
  5. Granitic tors of W. Kenya and high volcanic peaks such as those of Mt. Kenya are a tourist attraction which brings foreign exchange.
  6. Pumice is used as a scrubbing stone.
  7. A rock such as coal is used as fuel for heating, smelting of iron and thermal electricity generation.
  8. Source of minerals e.g. oil and coal is associated with sedimentary rocks.

MINING

-Process of extracting valuable minerals from the earths surface.

Formations in Which Minerals Occur

  • Veins and Lodes

-Occurrence of minerals in crevices, cracks or faults in igneous rocks.

  • They are said to occur in veins if they occur there in small quantities.
  • Said to occur in lodes if they occur there in large quantities e.g. zinc, copper and silver.
  • Reefs

-Veins and lodes which are exposed on the surface.

  • Seams/Layers/Beds

-Occurrence of minerals as sedimentary or as a result of compression of accumulated organic or inorganic material e.g. coal and halite.

  • Alluvial Deposits

-Occurrence of miner als while mixed with materials such as sand, gravel, silt, etc.

These were minerals which were detached from the veins by weathering and carried away by streams and rivers and got deposited e.g. gold, diamond and platinum.

  • Weathering Products

-Minerals formed by deep weathering of rocks then leaching carried minerals from the top to lower layers where they accumulated e.g. aluminium, nickel, iron and manganese.

  • Oil pools/Wells

-Occurrence of minerals in pools or wells in sedimentary rocks e.g. petroleum and natural gas.

Conditions Necessary for Formation of Petroleum

Image From EcoleBooks.com

  1. Presence of fossils or organic remains
  2. Presence of sedimentary rocks for burying organic remains.
  3. Presence of pressure to compress organic remains to cook the oil and natural gas out of organic matter.
  4. Presence of a porous reservoir rock to store and transmit petroleum to the oil pools e.g. limestone and sandstone.
  5. Presence of a trap like a syncline to hold petroleum in a reservoir to prevent its escape.
  6. Presence of impermeable rocks below the trap or syncline to prevent petroleum from percolating further underground.

 

Factors Influencing Exploitation of Minerals

  1. Value of Mineral

Minerals of high value will be mined even if they occur in small quantities because one sold it will be possible to offset mining costs and make a profit and vice versa.

  1. Quality of Ore

Mining can be done if the mineral deposits have high mineral content because they are economical to work on but deposits with low mineral content are rarely worked on except if the mineral in them is rare e.g. uranium.

  1. Size of Deposit

Minerals which aren’t of high value have to occur in large quantities for them to be mined so that it will be a possible to recover mining costs and make a profit.

  1. Capital

Lack of capital causes developing countries not to exploit minerals and leave it to international companies because a lot of money is needed for exploration, infrastructure, salaries, energy etc e.g. titanium mining at Kwale is being done by Tiomin company from Canada.

  1. Method of Mining

A mineral requiring open cast mining will be mined even if the mineral deposit is large but one requiring underground mining will be extracted if its in large deposit or if its of high value or rare.

  1. Transport costs

Minerals occurring in remote areas far from the markets are not likely to be exploited if the transport system is poorly developed since mineral ore is heavy and bulky and transporting it by road and railway is expensive.

  1. Market for the Mineral

Mining can be done if the mineral is in demand and if the prices are reasonable so that mining costs are offset and a profit is realised.

  1. Political Influence

Mineral deposits at the borders of two countries may not be exploited as a dispute may arise concerning whom mine it e.g. dispute between Iraq and Kuwait over Rumaila should oil field.

  1. Labour

Exploitation of some minerals require skilled workers and if they lack it may not be done as is the case in developing countries because expatriates have to be engaged and are very expensive to pay which may reduces the profits accruing from mining.

Methods of Mining

  1. Open Cast Mining

-Method of extracting minerals which are near the earth’s surface.

Types

  • Stripping

-Stripping off of the unwanted material lying on top of the mineral deposit and then digging to remove the mineral bearing rock if it’s soft or if it’s hard explosives may be used to loosen it and then huge power shovels are employed to dig up the mineral deposits.

  • Hill-slope Boring

-Using boring instruments known as augers to drill out mineral deposit and bring it to the surface.

  1. underground Mining

-Method employed when the mineral lies very deep below the surface and the overburden is too thick to be removed by mechanical means.

Types

  • Shaft Method

-Method employed when the mineral bearing rock doesn’t out crop.

Image From EcoleBooks.com

How it’s carried Out

  • Vertical shafts are sunk into the earth’s crust to reach the layer with the mineral.
  • Horizontal tunnels are dug from the vertical shaft to reach the mineral.
  • Props are erected to support the roof to prevent it from collapsing.
  • The mineral bearing rock is blasted loose by explosives.
  • The deposit is transported on light rail or conveyor belt to the bottom of the shaft.
  • It is then brought to the surface in a crane or a lift called cage.
    • Drift/Adit Mining

-Method employed when the mineral deposit can be reached from the valley sides.

  • Horizontal tunnels (adits) are constructed from the side of the hill.
  • Railway line is constructed into the mine to bring out the mineral e.g. mining of copper at Kilembe in Uganda.
    • Solution Method

-Method used in mining soluble minerals such as sulphur, salt, potash, etc.

  • Superheated water is ejected into salt deposits.
  • The mineral dissolves or melts.
  • The solution is then pumped into the surface.
    • Drilling

Method employed in exploitation of petroleum.

  • Wells (oil derricks) are drilled.
  • Oil and natural gas are brought to the surface under their own pressure or by pumping.
  1. Alluvial/Placer Mining

-Method used to extract minerals occurring in alluvial deposits e.g. gold, tin, diamonds and platinum.

 

Types

  • Panning

It involves:

  • Digging a mixture of sand, gravel and mineral from the river bed.
  • Putting it in a pan and rotating the pan while tilted.
  • The lighter sand or gravel is washed on the side leaving the heavier mineral at the bottom of the pan e.g. gold mining in Migori and R. Morun Beds in W. Pokot.
    • Dredging
  • A dredger scoops water logged alluvium from the bed of a lake.
  • The alluvium is passed over sloping channels with series of traps.
  • Wastes are washed away and denser materials are left at the bottom of the trap e.g. mining of soda ash at L. Magadi.
    • Hydraulic Mining

-Method used when alluvial deposit occurs on a valley side.

  • A powerful jet of water is directed at the deposit.
  • Gravel and mineral collect at the valley because of the great pressure.
  • The mineral grains are recovered and washed out.
    • Sub-marine Mining

-Method employed in extracting minerals in alluvial deposits lying deep down the ocean floor.

  • A sub-marine dredger goes down the ocean floor.
  • It scoops mineral deposit and rises to the surface.
  • The alluvium is passed over sloping channels with series of traps.
  • Wastes are washed away and denser materials are left at the bottom of the trap.

Significance of Minerals/Mining in Kenya

  1. Kenya earns foreign exchange from exportation of minerals which is used to import goods and services and fund development projects.
  2. Mining is a source of employment to people such as those who work in mines, in cement factories, in transport sector, etc.
  3. Mining has led to development of industries by providing raw materials used in those industries e.g. limestone used in cement factories, coal used in iron and steel industries, soda ash used in glass industry, etc.
  4. Mining has led to development of transport system to make mining areas accessible e.g. Magadi soda mine is connected to the main Mombasa-Nairobi railway line.
  5. Mining has led to development of settlements e.g. Magadi town which originated from the mining of soda ash.
  6. Mining is a source of market for goods and services e.g. there are shops and markets, banking and insurance services offered to people working in mines and related industries.
  7. Has led to development of social amenities by providing social facilities such as housing, health, electricity, water and education alongside infrastructure.

Distribution of Minerals in E. Africa

Phosphates used in the manufacture of fertiliser-Tororo in Uganda and Majingu Hill in Tanzania.

Limestone used in cement manufacturing-Hima in N.W Uganda, Tanga in Tanzania, Athi River and Bamburi in Kenya.

Fluorspar a source of fluorine used in chemical industries-Kerio Valley in Kenya.

Common salt used for consumption-Kilifi and Magadi in Kenya and L. Kitwe in Uganda.

Diatomite used in making insulators –Kariandusi near Gilgil and Gicheru in Nyandarua.

Stones in Machakos, Mutonga and Mbeere.

Carbon dioxide used in making dry ice and in beer and soft drinks industry- Esagari in Baringo and Kagwe in Kiambu.

Diamond used to make ornaments, glass cutters and drills-Mwadui in Tanzania.

Titanium used in the manufacture of insulators for aircraft- Kwale district.

Gemstones near Voi and Mwatate.

Soapstone used for sculpture-Tabaka in Kisii.

Copper used to make electrical wires and coins-Kilembe in Uganda.

Gold used to make medals and jewellery and as a basis of world currency-Musoma in Tanzania, Kakamega and Migori in Kenya.

coal used in smelting of iron and generation of thermal electricityin Ruvuma River Basin and Kivira Songwe in Tanzania.

Problems Facing Mining Industry in Kenya

  1. Inadequate capital making Kenya not to benefit from mineral resources because mining is left to multinational companies who pocket all the money to recover mining cost.
  2. Areas where mineral deposits are inaccessible due to poor transport and infrastructure which makes prospecting and mining difficult.
  3. Insufficient skilled personnel causing dependence on expatriates who are expensive to pay which reduces profits accruing from mining.
  4. Most of mining is controlled by foreign companies so most of the mineral revenue ends up to them as salaries and dividends.
  5. Occurrence of minerals in very small deposits which are not economically viable.
  6. Lack of power supply especially in remote areas with minerals.
  7. Land use conflicts which affect mining e.g. in Kwale between Tiomin and the local people due to inadequate compensation.

Effect of mining on the Environment

  1. Renders land useless for other economic activities such as agriculture (dereliction) due to open pits left on land and heaps of rock waste litter dumped on land.
  2. Pollutes the environment e.g. atmospheric pollution from dust and smoke from tractors and trucks, water pollution from spilling of oil from offshore oil drilling and soil pollution from chemicals and explosives used in mining.
  3. Leads to loss of bio-diversity due to destruction vegetation which also destroys habitats of various animals leading to their destruction also.
  4. Causes soil degradation e.g. by loosening the soil which makes it vulnerable to agents of erosion like wind and water, tractors and trucks compact the soil making water infiltration difficult and chemicals used interfering with soil chemical composition making it unsuitable for agriculture.
  5. Causes mass wasting when explosives and heavy equipment used in mining shake the ground making weathered materials to move faster down slope under the influence of gravity.

Trona mining on L. Magadi

Location

L.Magadi is 120km S.W of Nairobi on the floor of the Great Rift Valley.

Occurrence

Trona deposits occur as a solution of sodium salts the main ones being sodium sequicarbonate and sodium chloride.

Mode of Formation

  • Rain water dissolves soda salts in volcanic rocks.
  • The solution percolates through the rocks and soil and gets beneath the basin.
  • The accumulated solution is heated by the hot rocks beneath.
  • Pressure builds up and the heated solution is pushed to the surface.
  • It comes out of the ground inform of hot springs below or on the sides of the lake.
  • Due to high temperature water evaporates leaving behind crystals of trona.

Extraction and Processing

  • A dredger scoops trona out of the lake.
  • It crushes it into smaller pieces and separates it from rock debris.
  • The material is mixed with water to form slurry and transported to factory on the lake’s shore.
  • In the factory the slurry is mixed with water to wash out impurities such as mud and salt and dried.
  • It is sent to desiccators and heated to remove moisture and hydrogen to form soda ash.
  • Soda ash is cooled and ground into powder and sieved.
  • It’s packed into paper bags, weighed and transported to the market.

Uses of Soda ash

Used in the:

  • Glass industry in the manufacture of glasses and bottles.
  • Manufacture of soaps and detergents.
  • Softening water in paper making.
  • In textile industry.
  • In oil refining.

Benefits to the Economy

  1. Has led to growth of Magadi town ship.
  2. Has led to development of social amenities such as hospitals and schools and water from Oloibortoto River which has benefited the local people.
  3. Has led to development of infrastructure e.g. railway line from Konza to L. Magadi.
  4. The Magadi Soda Company employs many Kenyans including the nomadic Maasai.
  5. Exports of soda ash earn Kenya a substantial amount of foreign exchange.

 

Problems

  1. Stiff competition from developed countries with large soda deposits e.g. U.S.A and Israel.
  2. Low value of salt is insufficient to meet its production cost.
  3. High labour costs due to incentives given so that workers agree to work in the hostile environment of L. Magadi.

Gold in S. Africa

Gold occurs as small grains in a hard rock.

It’s mined by shaft mining since its bearing rocks are deep below the surface.

The main mining area is the Witwatersrand and others are Ogendaalrus and lydenburg.

Processing

  • Ore is crushed to a fine powdery dust.
  • Mixed with water until it is fluid mud.
  • Cyanide is added to dissolve gold.
  • The fluid is runoff with gold dissolved leaving behind waste salts.
  • Zinc dust is added to filter gold for solidification.
  • Gold sinks as it is denser.
  • Gold is smelted and cast into ingots.

Significance to the Economy of S. Africa

  1. Earns the country foreign exchange used for paying foreign debts.
  2. Offers employment to many people raising their living standards.
  3. Has led to widespread urbanisation contributing to formation of Witwatersrand conurbation.
  4. Has formed a broad market for other industries e.g. engineering, foot wear, electrical and construction industries.
  5. Has led to improvement of infrastructure and social amenities e.g. roads, schools, hospitals, etc.
  6. Led to development of agriculture.

Problems Facing Gold mining

  1. Expensive to mine for lying deeply.
  2. Large capital is required to start mines.
  3. Complication of mining by folds and faults in the crust.
  4. Low gold content in the ore.
  5. Problem of removal of underground water.
  6. Lack of adequate supply of fresh water on the surface in mining areas.
  7. Accidents resulting from collapsing of mine roofs.

Diamond Mining in S. Africa

Diamond is the hardest known substance.

-Mined in Kimberly, Bloemfontein and Alexander Bay.

-Mined by underground mining or alluvial mining.

Processing

  • Diamond bearing kimberlite is crushed
  • Crushed rock is mixed with water
  • Diamond sinks to the bottom as it’s denser
  • Water and less dense residue are drained off
  • Remaining material is put on heavily greased trays and washed
  • Diamond repels water so it sticks to grease while remnants are drained off
  • Diamonds are then sorted out and graded into gem diamonds and industrial type (for cutting purposes).

Contribution to the Economy

  1. Provides employment to thousands of people
  2. Earns the country substantial foreign exchange
  3. Has led to growth of urban centres e.g. Pretoria and Kimberly.
  4. Has contributed to development of infrastructure

Problems Facing Diamond Mining

  1. Fluctuation in the world market prices
  2. High cost of mining and processing diamond
  3. depletion of mines
  4. Low mineral in the ore making mining expensive
  5. labour competition with other sectors e.g. manufacturing and gold mining

Petroleum in the Middle East

Oil is a thick black sticky liquid called crude oil

  • It was formed from small creatures that lived in shallow lagoons about 100-200m ago.
  • Decaying remains of those creatures mixed with mud at the bottom as sediments
  • The sediments piled on each other and slowly transformed into sedimentary rocks
  • Gradually the remains were converted into oil and gas.

 

Major oil producers in the Middle East are Saudi Arabia with the largest reserves, Iraq, Kuwait and United Arab Emirates.

Middle East accounts for 64% of world oil reserves.

There are several giant oil fields in Ghawar in Saudi Arabia and Kirkuk in Iraq.

Processing

Crude oil is processed by refining using a technique called fractional distillation.

The process takes place near as possible to the market as it’s cheaper to transport crude oil than the different refined products.

It’s processed into secondary products such as petrol, paraffin, lubricating oils, dyes, fertilisers and plastics.

  • Impurities are removed from the crude oil
  • Crude oil is heated before entering fluctionating column
  • It’s turned into vapour or gas
  • Different ingredients turn back to liquid at different temperatures.
  • Ingredients gradually cool, condense and collect in various trays and allowed to overflow until they reach an outlet.

Contribution to the Economies

  1. Arab’s investments overseas have increased due to oil reserves.
  2. High income per capita due to oil profits.
  3. Has led to development of cities e.g. Tripoli in Libya.
  4. Investment of oil money in other sectors e.g. power stations, cement factories and exploitation of other minerals.
  5. Earns the countries substantial foreign exchange
  6. Increased political and military power.
  7. Artesian water is made available for domestic and irrigation purposes e.g. in Libya.
  8. Oil companies help in fixing down the sand dunes and planting trees in the deserts.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 




Share this:


subscriber

Leave a Reply

Your email address will not be published. Required fields are marked *

Accept Our Privacy Terms.*