Share this:
GEOPHYSICS
Geophysics is the branch of physics which deals with the study of seismic waves and the Earth’s magnetic and gravity fields and heat flow.
Because we cannot directly observe the Earth’s interior, geophysical methods allow us to investigate the interior of the Earth by making measurements at the surface. Without studying these things, we would know nothing of the Earth’s internal structure.
STRUCTURE OF THE EARTH
Major zones of the earth
The earth is divided into two major zones, namely;
(a) Outer zone, and
(b) Inner zone.
a) Outer zone: the earth’s outer zone consists of;
(i) The hydrosphere – water bodies,
(ii) The atmosphere – gaseous envelope
(iii) The biosphere – living organisms, plant and animals
b) Inner zone: the earth’s inner zone consists of;
(i) The crust – lithosphere
(ii) The mantle – mesosphere,
(iii) The core – barysphere
Atmosphere is the envelope of gases that surround the Earth (oxygen, nitrogen, carbon dioxide, etc)
Hydrosphere is the water bodies filling the depressions in the Earth. Examples are rivers, oceans, seas, oasis,
Lithosphere is the solid outer most part of the earth.
EARTH’S LAYERS
Layers defined by composition
Layers are defined by composition because of density sorting during an early period of partial melting, Earth’s interiors not homogeneous.
∙ Crust – the comparatively thin outer skin that ranges from 3 kilometers at the oceanic ridges to 70 kilometers in some mountain belts. It makes up 1% of the Earth’s volume.
Continental crust (SIAL, Silicon and aluminium)
Average rock density about 2.7 g/cm3
Its density varies between 2.0 to 2.8 g/cm3
Composed of silicon and aluminium
Floats higher on the mantle forming the land masses and mountains. It is 30 to 70 km thick.
Oceanic crust (SIMA), silicon and magnesium)
Oceanic crust ranges from 3 to 15 km thick
Density vary between 3.0 to 3.1 g/cm3
Floats lower on the mantle forming the oceanic basins. It is about 8 km thick.
€ € € € Mantle – a solid rocky (silica-rich) shell that extends to a depth of about 2900 kilometers. It makes up 83% of the Earth’s volume
The mantle can further be dived into:
(i) Upper layer of mantle (Asthenosphere)
(ii) Transition layer and,
(iii) Lower layer of mantle (Mesosphere)
Upper mantle is a rigid layer of rock with average density 3.3kgm-3
Transition layer is the layer that separates upper and lower mantle.
Lower mantle plays an important role in tectonic plate movement which creates earthquakes and volcanoes.
Its density is about 5.7 kgm-3
Note:
The mantle rocks are said to be in a plastic state.
The mantle rocks are said to be in a plastic state.
The upper part of a mantle has a temperature of about 8700C. The temperature increases downwards through the mantle to about 22000C near the core.
∙ Core – an iron – rich sphere having a radius of 3486 kilometers making up 16% of the Earth’s volume
The core is divided into two parts:
(i) Outer core
(ii) Inner core
i. Outer core is a liquid of molten iron and nickel alloys. The Earth’s magnetic field is generated within the outer core due to convective. It is 2270 kilometers thick.
ii. Inner core is a solid iron and nickel alloys. The temperature within the inner core is higher than the outer core but the inner core is solid, this is because higher pressure in this region causes the melting point to rise. It is a sphere of radius of 1216 kilometers.
Average density is nearly 11 gcm-3and at Earth’s center.
Layers defined by physical properties
Lithosphere (sphere of rock)
Earth’s outermost layer
Consists of the crust and uppermost mantle
Relatively cook, rigid shell
Averages about 100 kilometers in thickness, but may be 250 kilometers or more thick beneath the older portions of the continents
Asthenosphere (weak sphere partially molten)
Beneath the lithosphere, in the upper mantle to a depth of about 660 kilometers
Small amount of melting in the upper portion mechanically detaches the lithosphere from the layer below allowing the lithosphere to move independently of the asthenosphere i.e. allows tectonic plate movement.
Mesosphere or lower mantle
Rigid layer between the depths of 660 kilometers and 2900 kilometers
Earth’s major boundaries
Discontinuity is the name given to any surface that separates one layer from another layer of the Earth.
The Moho (Mohorovicic discontinuity)
Discovered in 1909 by Andriaja Mohorovicic
Separates crustal materials (crust) from underlying mantle.
Gutenberg discontinuity
∙ Discovered in 1914 by Beno Gutenberg
∙ Is the boundary between the outer and inner core.
The Earth’s Structure
TEMPERATURE INSIDE THE EARTH
Earth’s temperature gradually increases with an increase in depth at a rate known as the geothermal gradie
nt.
nt.
Temperature varies considerably from place to place
Averages between about 200C and 300C per kilometer in the crust (rate of increase is much less in the mantle and core)
The rate of heat flow within the Earth depends on:
(i) The thermal conductivity of the rock,
(ii) Temperature gradient of the rock
Sources of heat Energy within the Interior of the Earth
Major processes that have contributed to Earth’s internal heat include:
1. Heat emitted by radioactive decay of isotopes of uranium (U), thorium (Th), and potassium (K).
2. Heat released as iron crystallized to form the solid inner core.
3. Heat released by colliding particles during the formation of Earth.
4. Gravitational work done by the Earth due to its rotation through its own axis.
5. Electron motion in the core behaves like an electric current.
Heat Lost by the Earth
Heat in the earth is transferred by the process of;
(i) Convection and
(ii) Conduction
In the solid inner core and in the Earth’s crust heat is transmitted by conduction process. Rates of heat flow in the crust vary.
In the Mantle heat is transmitted by conduction process. Rates of heat flow in the crust vary.
In the Mantle heat is transmitted by convection process. There is not a large change in temperature with depth in the mantle.
Mantle must have an effective method of transmitting heat from the core outward.
Transfer of heat in the Earth by mantle convection
Uses of the Mantle
1. The mantle transfers heat by convection from the earth’s crust to the out regions of the earth and thus help it to regulate its temperature
2. The upper part of the mantle is molten, this allows tectonic plates movements.
EARTHQUAKES
An earthquake is a sudden motion or shaking of the earth caused by a sudden release of energy that has accumulated within or along edges of the earth’s tectonic plates.
Earthquakes occur within the Earth’s crust along faults that suddenly release large amounts of energy that have built up over long periods of time.
The shaking during an earthquake is caused by seismic waves.
Seismic waves are propagating vibrations that carry energy from the source of the shaking (earthquake) outward in all directions.
Seismic waves are generated when rock within the crust breaks, producing a tremendous amount of energy. The energy released moves out in all directions as waves, much like ripples radiating outward when you drop a pebble in a pond.
CAUSES OF EARTHQUAKES (SEISMIC WAVES)
The main causes of the Earthquakes and so seismic waves are:
1. Movement of tectonic plate.
2. Volcanic activity.
3. Landslide and avalanches.
4. Rebound of the crust.
5. Human activities.
Movement of tectonic plate
The Earth’s crust is made up of segment (layers) called tectonic plates which are slowly drifting in various directions. Tectonic plates may create a fault.
A boundary is a line where two tectonic plates meet.
A geologic fault is a fracture in the earth’s crust causing loss of cohesion and accompanied by displacement along the fracture.
How an earthquake is formed
Tectonic plates grind past each other, rather than slide past each other smoothly. As the plates move past each other they can become locked together due to friction. For some time, they don’t move and strain energy builds up. Stresses builds between them until fractional force holding the plates together give away. The plates move suddenly, releasing the energy and then held again. This sudden jerk is what is felt as an earthquake.
Note
(a) The Earth’s crusts near tectonic plate edges are forced to bend, compress, and stretch due to the internal forces within the earth, causing earthquakes.
(b) Nearly all earthquakes occur at plate boundaries.
Volcanic activity
Molten rock “magma” from the mantle is forced through a weak point in the Earth’s crust creating a volcanic eruption. When magma reaches the Earth’s surface it is known as “Lava”. Successive eruptions leads to the buildup of lava on the sides of the vent creating the familiar “cone – shape” of a volcanoes
Earthquakes may be created by the violent explosions which occur if there are sudden movements of the magma.
Landslides and avalanches
A landslide occurs when a large mass of land slips down a slope. An Avalanche occurs when a large mass of snow pours down a mountain side
. Both of these effects can start an earthquake
. Both of these effects can start an earthquake
Rebound of the crust
Elastic rebound theory state that “as tectonic plates move relative to each other, elastic strain energy builds up along their edges in the rocks along fault planes”. Since fault planes are not usually very smooth, great amount of energy can be stored (if the rock is strong enough) as movement is restricted due to interlock along the fault. When the shearing stresses induced in the rocks on the fault planes exceed the shear strength of the rock, rupture occurs.
It follows from this that if rocks along the fault are of a certain strength, the fault is a certain length, and the plates are slipping past each other at a defined rate, it is possible to calculate the amount of time it will take to build up enough elastic strain energy to cause an earthquake and its probable magnitude.
When a fault breaks it release elastic strain energy it stored, and hence earthquake.
Human activities
Human activities such as those caused by nuclear bombs can create earthquake, together with mine actives.
EARTHQUAKE TERMS
Energy released by an earthquake moves outwards from the origin in the form of concentric waves.
Focus (Hypocenter) is the point in the Earth where seismic waves originate.
Epicenter is the point on the earth’s surface vertically above the focus.
Epicenter is the point on the earth’s surface vertically above the focus.
Hypocentral distance is the distance between the focus and the seismic detection station.
Epicentral distance is the distance between the epicentral and the seismic station.
S = Seismic station
E = Epicenter
ES = Epicentral distance
TYPE OF SEISMIC WAVES
i. Seismic waves are elastic waves that propagate within the earth.
There are two type of seismic waves:
1. ii. Body waves, spread outward from the focus in all directions.
2. iii. Surface waves (Long, L – waves) spread outward from the epicenter to the Earth’s surface along the crust, similar to ripples on a pond. These waves can move rock particles in a rolling motion that very few structures can withstand. These waves move slower than body waves.
BODY WAVES
There are two types of Body Waves
(1) Primary P – wave and
(2) Secondary, S – waves
1. 1. Primary Wave (P – wave): Are longitudinal (compression) wave (travels in the same direction the waves move)
Characteristics of P – waves
1. Are the fastest seismic waves (7 – 14 km/second). Arrives at recording station first, hence the name primary means first.
2. Can pass through solid, gas and liquid, hence can pass through crust, mantle and the cores.
3. Are longitudinal compression waves. The rocks that transmit the P – waves are alternately compressed and expanded.
Velocity of P – waves
The velocity of primary waves depends on the density,bulk modulus B and the shear modulus
In solid, =
In liquid =
A fluid cannot support shear stresses hence
2. Secondary Wave (S – wave): Are transverse (shear) wave (travels perpendicular to the wave movement).
Characteristics of S – waves
1. i. Slower moving (3.5 – 7 km/second) hence are detected after primary waves.
2. ii. Caused by a shearing motion
3. iii. Cannot pass through a fluid (gas or liquid) because they are transverse. Hence are unable to pass through the liquid outer core.
Velocity of S – waves
The velocity of shear waves depends on the density and the shear modulus
In solid, =
In liquid =
Note: Since the density and states of the earth layers varies, the speed of the seismic waves also vary from layer to layer, the solid part showing greater speed and the liquid ones lower speed.
Primary wave and secondary wave
Variation of speed of body waves with depth
SURFACE WAVES/LONG WAVES
Surfaces waves are produced when earthquake energy reaches the Earth’s surface.
These are the slowest moving waves, but are the most destructive for structures on earth
There are two types of L – Waves:
(i) Love long waves
(ii) Rayleigh long waves
i. Love Waves
Love waves are Transverse horizontal motion, perpendicular to the direction of propagation and generally parallel to the Earth’s surface.
They are formed by the interaction of S waves with Earth’s surface and shallow structure and are dispersive waves. The speed at which a dispersive wave travels depends on the wave’s period.
Characteristics of Love Waves
1. i. Love waves are transverse and restricted to horizontal movement (horizontally polarized).
2. ii. The amplitude of ground vibration caused by a Love wave decrease with depth. The rate of amplitude decrease with depth also depends on the period/frequency.
3. iii. Loves wave are dispersive, i.e. wave velocity is dependent on frequency; low frequency – higher velocity.
4. iv. Speed of love waves is between 2.0 and 4.4 km/s
5. v. Love waves travels within the earth’s crust only.
LOVE WAVE
Rayleigh Waves
Rayleigh waves are vertically polarized long waves. The slowest of all the seismic wave types and in some ways the most complicated.
Characteristics of Rayleigh Waves
1. Rayleigh waves are transverse and restricted to vertical movements (vertically polarized).
2. The amplitude of Rayleigh wave decreases with depth. The rate of amplitude decrease with depth depends on the period/frequency
3. Rayleigh wave are dispersive, i.e. wave velocity dependent on frequency; low frequency – high velocity
4. Speed of love waves is between 1.0 and 4.2 km/s slowest of all waves.
5. Travels within the earth’s crust only.
6. Depth of penetration of the Rayleigh waves depend frequency, with lower frequencies, penetrating greater depth.
PROPAGATION OF SEISMIC WAVES
Like all other types of waves, seismic waves may undergo,
(i) Reflection, (ii) Refraction, (iii) Dispersion, (iv) Diffraction, (v) Attenuation.
Seismic reflection:
Seismic waves bounce (reflect) rock boundaries of different rock type (density).
Seismic waves bounce (reflect) rock boundaries of different rock type (density).
Seismic refraction:
Waves change velocity and direct (refract) when they enter a medium of different density it the one they just passed through.
Waves change velocity and direct (refract) when they enter a medium of different density it the one they just passed through.
Seismic Dispersion:
surface waves are dispersive which means that different periods travel at different velocities. The effects of dispersion become more noticeable with increasing distance because the long travel distance spreads the energy out (it disperses to energy).
surface waves are dispersive which means that different periods travel at different velocities. The effects of dispersion become more noticeable with increasing distance because the long travel distance spreads the energy out (it disperses to energy).
SEISMIC WAVE PATHS
By comparing the data recorded by many stations all over the world the nature, speed and the paths of the seismic waves can be determined. This information can be used to tell us about the earth’s interior such as density sand state in each layer.
L – Waves travel within the Earth’s crust only
P and S waves travel through the earth in a curve path. The waves are refracted because their speeds a constantly changing with depth due to continue increase in density. Waves are also strongly refracted the Mantle – Core boundary.
Surface waves travels through the Earth crust only
Shadow zone is the region on the Earth’s surface where no S or P waves are present.
This lies between 1050 and 1400. Only surface waves may be detected in this region.
Shadow zone occurs because:
(i) P – Waves are strongly refracted at the liquid outer core.
(ii) S – Waves can’t travel through the liquid outer core.
Seismic waves can also be used to locate the discontinuities in the earth’s crust. A change in density or crack would affect the propagation of the waves.
This alteration in the wave’s path or speed would indicate the discontinuity.
The fact that S waves do not travel through the core provides evidence for the existence of a liquid layer beneath the rocky mantle.
The change in the velocity of P waves at crust – Mantle boundary reveals the presence of Mohorovicic discontinuity
P waves passing through the inner core show increased velocity suggesting that the inner core is solid.
Both P and S – Waves slow down when they reach the asthenosphere. Because of this scientists know that the asthenosphere is partially liquid
MEASUREMENTS OF EARTHQUAKES
i. Seismology is the scientific study of earthquakes (seismic waves) and artificially produced vibrations in the earth.Seismograph is a sensitive instrument that is used to record earthquakes and seismic waves (i.e. ground movements).
ii. Seismogram is the record of ground movement drawn by a seismograph.
The arrival of seismic waves at a station
Seismograph consists of a heavy weight suspended from a frame fixed into the ground. When the earth vibrates the frame moves but the heavy weight remains stationary due to great inertia. A pen attached to weight plots the earth’s movements on a chart recorder to produce a seismogram. To obtain a complete record of the earthquake measurements must be taken in all three planes (x, y and z).
The recording of the motion caused by seismic waves can be done by using;
(a) Mechanical method, as in the drawing above.
( (b) Optical method, where light is used to write the motion on a photosensitive paper instead of using a pen.
(c) Electronic method, where a coil is fixed to the mass of the pendulum and moves in a magnetic field. This induces a voltage which is amplified so that they can be easily interpreted.
Seismometers record both the magn
itude and intensity of the earthquake.
itude and intensity of the earthquake.
LOCATING THE EPICENTRE
Although S – waves, P – waves and surface waves all start out at the same time, they travel at different speeds. The speed of a traveling seismic wave can be used to determine the location of an earthquake epicenter.
A seismograph records the arrival time and the magnitude of horizontal and vertical movements caused by an earthquake. The arrival time between different seismic waves is used to calculate the travel time and the distance from the epicenter.
The difference in arrival time between primary waves and secondary waves is used to calculate the distance from the seismograph station to the epicenter.
It is crucial that seismic waves are recorded by three different seismograph stations in order to estimate the location of the epicenter.
(i) Locate at least 3 stations on a map that recorded the seismic waves.
(ii) Calculate the time difference between arrival of P – waves and arrival of S – waves from a seismogram. The time difference is proportional to the distance from the epicenter. Because the direction to the epicenter is unknown, the distance defines a circle around the receiving station. The radius of each circle equals that station’s distance from the earthquake epicenter.
(iii) The epicenter is where the circles intersect.
|
SIZE OF AN EARTHQUAKE
The size of an earthquake can be measured in terms of its intensity (Mercalli/Wood Neumann scale) or its magnitude (Richter scale).
Mercalli Intensity Scale
The Mercalli scale measures the intensity of how people and structures are affected by the seismic event. In essence, it measures damage. It is much more subjective and uses numbers ranging from 1 (no damage) to 12 (total destruction).
Degree 1 | Explanation Detected by a seismograph only |
6 | Felt by all, many frightened. Some heavy furniture moved, some fallen plaster, general damage small |
12 | Total damage, large cracks, waves seen moving through the ground, objects are thrown upwards. |
ISOSEISMAL LINES
Intensity distribution maps can be drawn up showing the intensities of an earthquake over a region. The earthquake is most intense at the epicenter and decreases with distance.
Isoseismal lines are line joining points of equal intensity.
Richter magnitude scale
The magnitude of an earthquake is measured in terms of energy released by an earthquake. This is determined from the amplitude of the seismic wave recorded on a seismogram 100 km from the epicenter. The magnitude is equal to the logarithm of the amplitude. Therefore each successive number represents a tenfold (x10) increase in the ground motion. The Richter scale starts at 0 but has no upper limit. -However 8 represent an earthquake that causes total destruction within the region.
Magnitude | Amount of explosives (TNT) needed to release the equivalent energy, in tons |
6 | 6,000 |
7 | 180,000 |
8 | 5.4 million |
Intensity of an earthquake is a measure of its strength based on the changes it causes to the landscape.
EARTHQUAKE PREDICTIONS (WARNINGS)
Forecasting (predicting) earthquakes is very difficult, although there are a number of warning signs which occur before an earthquake happens.
(i) Change in the velocity of p – waves.
(ii) Electrical resistivity of the rocks decreases.
(iii) An increase in radon, emission (radon is an inert gas, radon is found to increase in soil and water samples).
(iv) Increase in fore shock (small tumors that occur just before an earthquake).
(v) Local variations in the magnetic field.
(vi) Animals begin to behave strange.
(vii) Water levels rise or fall in wells few days before earthquake.
(viii) Increase in temperature of the area few months before the occurrence of an earthquake
PRECAUTIONS
Some of the world’s populations are living in regions where there is a high risk of an earthquake. Most of these regions lie along fault lines. However a few precautions can be taken to reduce the damage caused.
(a)Build structures that can withstand the forces of an earthquake. One method is to include shock absorbers into the buildings foundations.
(b)Scientific research has shown that pumping water out of the earth reduces the stress in the crust hence preventing an earthquake. However this technique is very expensive.
(c) Stay away from tall buildings or structures during an earthquake if you are outside on occurrence.
(d) If you are inside a house, stay in a safe place where things will not fall on you.
EARTHQUAKE HAZARDS
Earthquake give rises to a number of hazards which pose a great risk to human life, animals, property and the environment at large. The following are some hazards:
1. Landslides and avalanches: The shaking caused by an earthquake can cause unstable hillsides, mountain slops’ and cliffs to move downwards creating landslides. Earthquakes can also trigger avalanches on snow slopes
2. Tsunamis: If an earthquake occurs under the sea or ocean, the shock waves disturb the water. The ocean floor can rise or fall causing the water to rise and fall too. This movement creates huge water waves called tsunamis that travel across the ocean.
3. Collapsing building: Buildings or structures may collapse during a strong earthquake. The collapse of the building may kill people.
4. Fire outbreak: Earthquakes can cause gas or oil pipes to break and or the collapse of electricity lines. This may set up fire.
5. Backward rivers: Tilting ground due to earthquakes can make rivers change their course.
REFLECTION SEISMOLOGY
This is the study of reflection of seismographic waves by different materials inside the earth.
Applications:
(i) Location of underground oil and water
(ii) Locate discontinuities within the earth
SEISMIC PROSPECTING
Seismic prospecting is the sending of seismic waves into the deep earth’ crust in order to study the structure of the earth or detecting oils or gases in the interior of the earth by utilizing the property of reflection and refraction of the seismic waves.
THE EARTH’S MAGNETIC FIELD
The earth has a weak magnetic field, 95% of this field is created inside the Earth’s core 5% is the result of atmospheric effects above the Earth’s surface.
Geomagnetism is science of study of the earth magnetic field, its causes and its variations.
Generation of the Earth’s magnetic field within the core
The accepted explanation for the origin of the Earth’s magnetic field within the core is given by Lemoir’s self exciting dynamo theory.
The Earth’s Outer Core consists of molten conducting metals (Iron and Nickel) which are rich in free electrons. The Earth’s rotation causes the molten metal to rotate and hence large convection currents are set up within the outer core. These currents generate a magnetic field.
Eddy currents are now generated due to a conducting material moving in a magnetic field. These Eddy currents modify the position of the Earth’s magnetic field so that it does not lie along the Earth’s axis of rotation. The present magnetic poles are situated 800km from the Earth’s axis.
Generation of magnetic field in the Atmosphere
In the Earth’s atmosphere there is a region know as the ionosphere which consists of free electrons and ions. The movement of these charges creates a magnetic field. This effect provides a small fraction of the Earth’s total magnetic field.
TERMS ASSOCIATED WITH THE EARTH’S MAGNETIC FIELD
Magnetic meridian: A vertical plane passing through the axis of a freely suspended magnetic needle.
Geographic meridian: A vertical plane passing through the geographic axis.
Magnetic equator: Is the locus of points on earth’s surface where the needle (free to rotate in a vertical plane) remains horizontal.
The Earth’s magnetic field pattern is similar to that produced by a giant bar magnet or solenoid.
Note: (i) The magnetic North pole which lies in the Northern Hemisphere behaves like a south pole or a bar magnet, i.e. the field lines are directed towards it.
(ii) The magnetic south pole which lies in the southern hemisphere behaves like a north pole of a bar magnet, i.e. the field lines are directed away from it.
ELEMENTS OF EARTH’S MAGNETISM
Angle of variation of declination, at a place is the angle between the geographic meridian and the magnetic meridian at that place.
Angle of dip or declination, at a place is the angle between the directions of intensity of the earth’s total magnetic field declinationand the horizontal direction, in the magnetic meridian at that place.
Horizontal component of Earth magnetic field It is the component of the Earth’s total magnetic field along the horizontal direction in the magnetic meridian.
By Pythagoras theorem
By trigonometric ratio
Points to note about angle of Dip
(a) At the poles,
Therefore, only horizontal component exists at the poles
(b) At the equator
At the equator only horizontal component exist.
VARIATIONS OF THE EARTH’S MAGNETIC FIELD
The Earth’s magnetic field is not constant but varies continuously with time.
(i) Short term variations (Irregular changes): The magnetic field changes daily due to variations in the magnetic field created in the ionosphere. The charged particles in this region of the atmosphere are affected by the Sun’s gravitational pull (which is stronger when the sun is directly above that area)
Also during periods of high solar activity charged particles from the solar wind are able to penetrate the magneto pause and arrange themselves under the influence of the magnetic field in a formation called Van Allen Belts.
These charged particles cause further Eddy currents within the ionosphere, altering the Earth’s magnetic field strength.
These charged particles cause further Eddy currents within the ionosphere, altering the Earth’s magnetic field strength.
Solar wind is a continuous stream of moving electrons and protons in the atmosphere which are produced from flare (eruptions) from the sun. Normally these charged particles move from west to south at 300 – 500 km/s.
Magnetic storm is a sudden worldwide disturbance of the earth’s magnetic field caused by dynamic interaction of the earth’s magnetic field and the sun. During magnetic storm, the earth’s magnetic field is unusually active.
Effects of Magnetic Storm
(a) Large storms can cause the loss of radio communication
(b) Damage satellite electronics and affect satellite operations.
(c) Increase pipeline corrosion
(d) Induce voltage surges in electric power grids causing blackouts.
(e) Reduce the accuracy of global positioning systems.
(ii) Long term variations (Secular changes): The Earth’s magnetic field position is constantly changing, now the magnetic North pole is moving at 8 km per year, and the magnetic South Pole at 16 km per year.
Evidence from the alignment of magnetized rocks layers in the Earth’s crust show that the Earth’s magnetic field has actually reversed in direction several times during the Earth’s history (i.e. the direction of the fields have reversed causing a north acting pole to become a south acting pole.) The present polarity of the Earth’s magnetic field has not changed for 700,000 years.
VAN ALLEN BELTS
The Van Allen belts consist of two regions of highly charged particles which are trapped within the Earth’s magnetic field:
Inner Belt consists of protons and positive charged particles
Outer Belt consists of electrons and negatively charged particles.
THE ATMOSPHERE
Earth’s atmosphere is divided into five main layers, the exosphere, the thermosphere, the mesosphere, the stratosphere and the troposphere. The atmosphere thins out in each higher layer until the gases dissipate in space. There is no distinct boundary between the atmosphere and space, but an imaginary line about 110 kilometers from the surface, called the Karman line, is usually where scientists say atmosphere meets outer space.
TROPOSPHERE
The troposphere is the layer closest to Earth’s surface. It is 10 km thick and contains half of Earth’s atmosphere. Air is warmer near the ground and gets colder higher up. Nearly all of the water vapor and dust in the atmosphere are in this layer and that is why clouds are found here.
Lapse rate is the rate of fall of temperature in degrees per kilometer rise. It has an average value of 6 0C per km in the troposphere.
Tropopause is the upper boundary of the troposphere.
Importance (uses) of troposphere
1. Controls the climate and ultimately determines the quality of life in the atmosphere.
2. It supports life on earth. It contains oxygen which is used to respiration by animals.
STRATOSPHERE
The stratosphere is the second layer. It starts above the troposphere and ends about 50 km above ground.
The temperature of the stratosphere slowly increases with altitude. This temperature increase is due to the presence of Ozone layer which absorbs heat from the sun in the form of ultraviolet light.
The Ozone layer occupies the middle of stratosphere between 20 and 30 km it consists of Ozone formed by oxygen molecules dissociated and reforming into 03.
The air here is very dry, and it is about a thousand times thinner here than it is at sea level. Because of that, this is where jet aircraft and weather balloons fly.
Stratopause is the upper boundary of the stratosphere.
Importance (uses) of stratosphere
The stratosphere prevents harmful ultraviolet radiation from reaching the earth. Ozone absorbs harmful radiation from the sun. The Ozone protects plants and shield people from skin cancer and eye cataracts.
MESOSPHERE
The mesosphere starts at 50 km and extends to 80 km high. The top of the mesosphere, called the mesopause, is the coldest part of the Earth’s atmosphere with temperatures averaging about – 900C. The temperature of the mesosphere decreases with altitude (because there is no ozone to absorb heat).
This layer is hard to study. Jets and balloons don’t go high enough, and satellites and space shuttles orbit too high. Scientists do know that meteors burn up in this layer.
Importance of mesosphere
Mesosphere, thermosphere and exosphere prevent harmful radiation such as cosmic rays from reaching the earth surface.
1 Comment