Share this:


SOIL

Is the thin upper layer of the earth’s crust which has been weathered from the parents material and decomposed animals and plants .soil support plants growth and animal life.
FACTORS INFLUENCING SOIL FORMATION
Soil formation is sometimes called Tredogenesis.
The formation of soil is mainly initiated by weathering process. There are several factors which influence soil formation these are as follows:
a) PARENT ROCK MATERIAL
This is one of the chief factors of soil formation. It determines soil type, color, depth, rate of soil formation, structure, texture, porosity and soil fertility.
Parent rock influence soil maturity, therefore hard rocks take a long time to mature while soft rocks take a short time to mature. Shallow and poorly productive
b) CLIMATE
The most variable elements under climate are temperature, precipitation (rainfall) and wind
  • Temperature affects decomposition of organic matter hence it influences the development of soil profile
  • Rainfall and wind encourage the formation of soil due to their role in the erosion process
  • On the other hand rainfall adds moisture which encourages chemical and physical weathering
c) LIVING ORGANISM
Some plants have nodules with bacteria which add nitrogen into the soil hence improve aeration of soil. Micro organisms are active in the decomposition of the organic matter to form humus on the other hand barrowing of animals and plant roots facilitate the state of both physical and chemical weathering hence lead to the formation of soil easily.
d) RELIEF [TOPOGRAPHY]
The role of relief in soil formation is mostly in indirect way. Relief influences climate and vegetation. The most important aspect of topography in soil formation, steep slopes areas soils are shallow due to erosion while on a gentle slopes and low land areas soils are deep due to deposition of materials.
e) TIME
This involves the duration that has been taken in the process of soil formation. Time determines the maturity of soil, when soil formation has taken a long time, soil tends to be mature i.e. they are deep and well developed.

IMPORTANCE OF SOIL
Soil is virtual life support to both flora and fauna organism , because all the organisms depend on the soil as their source of food . soil is therefore important to both plants and animals life in various ways including the following:-
(i) Animal life support
soil acts as plant habitat in which animals uses plants as food for their survival.
(ii) Building materials
soil is used directly in making of bricks ,tiles and white wash, The materials are the used in building of houses ,bridges and other structures.

iii) Source of minerals
some soils contains minerals which can be extracted for commercial purposes . For example Titanum is obtained from soil deposit of Kwale near Mombasa in Kenya Bauxite , which is mined in Guinea in West Africa
(iv) Cultural and medicinal values
Some soils are cultural value in some communities e.g red ochre and clay are used for body decorations by Maasai communities and clay mixed with herbals and being used for medicines

(v) Farming and settlement
fertile soil influence cultivation of crops .settlement distribution also depends on arable fertile soil where as people tend to dwell in areas with food availability.

(vi) Habitat for organisms
soil functions as a habitat for organisms such as burrowing rodent, earthworms and termite. These organisms perhaps are significant in the process of soil formation
SOIL CONSTITUENTS (COMPONENTS)/COMPOSITION
Soil is made up of the following components;
1. Organic matter
This forms 5% of the total volume of soil and is made up of plant and animal remains. This forms humus as a result of decomposition of animals and plant remains.
IMPORTANCE OF HUMUS
i) Improving the structure of the soil and its water retaining capacity limits the leaching process and improves the soil acceleration
ii) Storing and supplying nutrients to the plant like nitrogen, phosphorus, potassium, calcium – high production.
iii)Humus regulates the temperature of the soil and soil pH
iv) The living micro-organisms help in decomposition.
2) 2. Inorganic matter
This forms 45% of the total volume and is made up of minerals from the parent rock. Minerals constitute several nutrients which are needed by plants.
3) 3.Soil water
Forms 25% of the total volume and it is one of the most important soil components. It is derived essentially from rainfall especially from infiltration and through flow.
IMPORTANCE OF WATER
a) It regulates temperature in the soil
b) It helps in the solution and transfer of nutrients in the soil
c) Too much water in the soil leads to the leaching of mineral nutrients in the soil
d) It controls chemical processes like weathering as well as mechanical weathering.
4) 4. Soil air
It forms 25% of the total volume. It consists of the soil atmosphere from which plants and soil organisms obtain oxygen for their metabolism and dispose of carbon dioxide and other gases.
SOIL PROPERTIES
A: PHYSICAL PROPERTIES
1. SOIL PROFILE
This is the vertical section from the surface to the parent rock characterized by distinct layers usually of different texture and colors.
A- horizon
Is the topmost layer and can include organic matter to form humus. Horizon ‘A’ varies in color from place to place for example dark, grey etc. this zone is also called the zone of Elleviation from which materials are washed down ward. It is in this place where leaching process takes place.
LEACHING
Is the washing down of nutrients in solution from the topmost layer to another layer
B-
horizon
This zone is also known as the zone of accumulation. In this layer the materials washed from ‘A’ horizon are deposited or accumulated.
C- horizon
Is the partially weathered parent rock from which the soil develops, it is underlined the D horizon which is the fresh [unweathered] parent rock.

D-horizon(Bedrock)
It is the unweathered parent rock. it is the parent in sense that it is the source of the in organic content of the soil
2. SOIL DEPTH
Soil depth varies from place to place depending on maturity. Maturity is influenced by the nature of the rock as well as duration of the soil forming processes which have been operating.
Soil depth is important for agricultural activities. Thus deep soil is important for agricultural activities while shallow soil is not good for cultivation.
3. SOIL COLOUR
Soil color is determined by the materials and the mineralogical composition from which the soil is derived and organic matter content. It varies from one place to another. Soil color can be classified and described in terms of
a) Dark [ black, grey, dark brown etc ] and cinnamon
b) Bright [ yellow, orange, red, reddish brown and yellow brown ]
c) Light [ white, whitish grey]
4. SOIL TEXTURE
This refers to the degree of coarseness of soil (especially soil mineral particles). It can also be referred to as variations in the particle size, caliber or mechanical composition
According to the soil texture, soil can be classified as;
a) Coarse sand (2 to 0.2mm)
b) Fine sand
c) Silt (0.02mm)
d) Clay (less than 0.002mm)
e) Loan soil is a mixture of sand, clay and silt.
NB; measuring of soil texture can be done through the use of finger testing
IMPORTANCE OF SOIL TEXTURE
1) It influences soil porosity, permeability, structure and retention capacity
2) It influences plant growth and root penetration
3) It influences the cultivation during agricultural activities
4) It influences soil resistance against erosion
5) It influences soil fertility
5. SOIL POROSITY
These are the total volume of the pores or empty spaces between particles of the soil materials especially in the soil. Soil porosity is mainly influenced by soil texture, organic matter, soil structure, individual undisturbed soil aggregate compounds referred to as peds.
IMPORTANCE OF SOIL STRUCTURE
i) It determines water retention capacity and aeration
ii) It is an indicator of soil fertility or suitability for agricultural activities, settlement locations and construction
iii) Good structure facilitates the activities of the micro organism
iv) It influences the cultivation process
v) It influences the plant growth by influencing the root penetration and water retention
-Therefore it is quite fundamental to note that the best soil is that which influences the water holding and aeration capacities of the soil.
6. SOIL STRUCTURE
This is the arrangement of soil particles into aggregate compounds particles. Individual undistributed soil aggregate referred to as peds.
7. SOIL TEMPERATURE
Soil has a certain degree of temperature and this tends to vary from one place to another due to the variation in the climatic condition.
IMPORTANCE OF SOIL TEMPERATURE
1) It controls biochemical and chemical processes especially the decomposition of organic matter and plant growth. Thus plant growth and decomposition tend to be fast in warm areas and slow in cold areas, this is due to the fact that growth cells and micro organisms tend to be very active in the warm areas unlike in the cold areas where they tend to be inactive or less active.
2) It also determines the existence of micro organisms in certain areas. In extremely hot areas and cold areas may not support the survival of animals and other micro organisms
3) It controls the amount of moisture in the soil where there is high evaporation soil moisture is less or the soils are dry
B : CHEMICAL PROPERTIES
These include soil properties like soil reaction (PH), reaction exchange an
d leaching.
1) Soil reaction ( soil PH)
This is the term used to describe the degree of acidity and alkalinity in the soil and it is related mainly to climate. This degree of acidity and alkalinity is expressed in the PH value which is the measure in terms of hydrogen ions concentration held by the soil colloid. Soil PH scale range from 1 to 14 where ph 7 is neutral, the condition below 7 is acidic while the condition above 7 is alkalinity which means it has more alkalis.
IMPORTANCE OF SOIL PH
  • It helps in determining the selection of crops and agricultural distribution
  • It affects plant growth such that where there is too much acidity there will be poor plant growth. This is because the increase of acidity leads to the increase in leaching with affects soil structure
LEACHING
This is another chemical property of soil referring to the process in which nutrients are washed down in solution from the top – soil laver. During leaching process the base are washed down leading to concentration of hydrogen ions which in turn cause the increased acidity in the top soil.
Leaching is very effective in wet conditions
SIMPLE HYPOTHETICAL PROFILE FOR MATURE SOIL
The soil profile varies from one place to another depending on the variation in environment conditions.
For example under deciduous forest, soil with little organic matter can be produced (brown either or brown forest soil) while in mid latitude grasslands deep black earth soil (chernozem) is formed.
Chernozem has a lot of organic matter. In the desert area the soil profile usually lack the Ao horizon due to scarcity or absence of vegetation.
SIMPLE SOIL CALSSIFICATION
Soil classification refers to the grouping of soil according to specific characteristics, such as properties or factors like climate also soil can be classified according to the age, texture and color. One common classification is that
based on texture.
According to the soil texture triangle, there are three main texture namely sand, silt and clay. This is based on the size of their particles as discussed earlier. There percentage content of each one of these determines the type of soil according to texture. Note that sandy soil have sand content of over 45% clay soil have above 27% while silt soil have silt content of above 40%.
SOIL TEXTURE TRIANGLE
SAND
This soil consists mainly of course and fine sand and contain very little among of clay such that it not sticky when wet and is lose when dry, percentage of sand is above 85, that of clay is up to 10 and silt is up to 10. When such soil is rubber, it does not leave any film on the figures.
LOAMY SAND: This consists most of sand but with sufficient clay such that it gives it a slight plastic quality when it is very moist. When it is rubbed between figures it leaves a slight film of fine material, sand particles account for 70% to 90% clay up to 15% and silt up to 30%.

SANDY LOAM: This soil has high percentage of sand between 43% and 85% with clay content of up to 20% and silt up to 50%. It moulds easily when it is sufficiently moist but does not stick easily to the figures.
LOAM
In this soil, sand and silt dominate an average of 40% each while clay account for about 20% on average. It moulds easily when it has sufficient moisture and does stick to the figures to some extent.
SILT LOAM
It has a high percentage of silt of between 50% and 87% sand between 13
% and 50% and clay up to 27%. It is moderately plastic and not very sticky it has a smooth soapy feeling due to high content of silt.
SAND CLAY LOAM
This has over 45% sand, up to 28% silt and clay between 20% and 35%. It can be a bit sticky because of the clay content but quit porous because of the sand.
CLAY LOAM
Sand content between 20% and 54% silt between 15% and 53% clay between 27% and 40%. This one has sticky distinction when moist because of clay.
SILT CLAY LOAM
The amount of sand is between 27% and 60%, silt between 40% and 78% and clay between 27% and 40%. The high silt content makes it smooth and has a soapy feeling. It is less sticky than clay loam or silt clay.
SILT
This have over 80% silt particles, up to 20% sand and less than 12% clay. It is predominantly smooth and has a typical soapy feeling of silt.
SANDY CLAY
Sand between 45% and 65% silt up to 20% and clay between 35% and 55%. In the presence of sufficient moisture this soil is plastic and sticky clay and sand is dominated.
CLAY
The proportion of sand goes up to 45%, while that of silt is up to clay account for above 40%. The soil is sticky when moist has a plastic feel. It can be rolled into threads when moist and can be molded into different shapes. And can retain fingerprint.
SILT CLAY
EFFECTS OF SOIL EROSION
Soil erosion is a serious challenge which has many effects on social and economic activities.Some of these effects are explained below:-

(i)loss of productive soil.
When the to productive soil is eroded it is lost forever only the unproductive stony soil is left behind the consequently is the lowering of agriculture productivity of land.

(ii)Depict of vegetation cover.
The eroded land cannot hold the plants including crops are washed away or are buried in the deposit soil way from their original location.

(iii)Destruction of structures.
when erosion takes place bridges can being taken away from their original areas . other structures like road ,railways, as well as buildings can collapse after erosion of soils.

(iv)pollution to environment.
Eroded soil that is carried into rivers lake s and oceans may contain chemical pollutants collected by water from farm and dumping grounds, hence resulting to loss of aquatic organisms.

(v)provides sand for building and construction activities.
sand which is eroded from steep slope is deposited on river bed from where it is scoped when the water flows in the river has diminished or even stopped.The sand is then used for construction purpose this is common in
Mpiji river at Bunju Dar es salaam and most parts of kisarawe II in coastal region.


POPULATION GROWTH AND SOIL EROSION
When the region is severely affected by soil erosion, where crop production impeded when useful soil are carried away, the region experience shortage of food.even the vegetable that used to grow wild become non-existence, This causes famine and malnutrition with inadequate nutrition ,child mortality rate goes up and population growth is impeded.
Soil erosion renders the land unsuitability for habitation when gullies develop the land is unsuitable for settlement and farming . The foundation of existing buildings and roads are eroded
Soil erosion leads to lowering of the w
ater table in a region.this causes destruction of the vegetation in the water catchment areas and leads to shortage of water resources ,the wells may dry up this means that women and children have to travel long distance in search of water that means children may not go to school general health of both women and children becomes poor this may lead to early death and linear population
Also when land become more eroded it can lead land to be unfertilized therefore it accelerate rural-urban migration especially for men who migrate to urban areas.Then led to increase of the population in urban area than the rural areas where man power decrease due to rural urban migration.

SOIL EROSION CONTROL MEASURES
soil erosion is a geological process, However when it exceeds normal rate, That is when it becomes a problem. we can not talk about stopping soil erosion .The following are some of the measures that can be taken to control soil erosion
(i)Afforestation and reafforestation
Afforestation is the planting of trees where no forest has been known to exist . Reafforestation /Reforestation is the process of planting trees on land that previously had a forest the trees help to hold
soil particles
together so that they can not easily blown away by the wind or carried way by running water.

(ii)Control of bush fires
When the grassland ,are burnt the soil is directly exposed to agents of erosion , IF the piece of land has to be cleared for cultivation the old grasses and bushes should be cut down and grasses put
aside in heap,this
will prevent soil from erosion

(iii) controlling overgrazing
There should be matching the number of livestock kept in a piece of land with the carrying capacity of land .The land can also be divided into paddocks i.e individual division of blocks of land and there after animals are grazed in one paddock at a time ,they then transferred to another division in later days.


subscriber

Leave a Reply

Your email address will not be published. Required fields are marked *

Accept Our Privacy Terms.*